Pic23D Open converter

No upload · No account · Real millimetres

Image to STL converter

Load a picture, pick a mode, get a printable STL measured in real millimetres. The height-map modes run in this browser tab, so nothing is uploaded and you do not need an account.

Download the file

No image loaded yet. Your picture is read by this browser tab and never sent to a server.

Pick an image to start. Nothing is uploaded.

The three height-map modes run entirely in this browser tab — nothing is uploaded. Need the object itself rather than a relief? Try the AI image to 3D mode, which uses a server.

How the image to STL conversion works

  1. 01

    Load the picture

    Any JPG, PNG or WebP. Transparent PNGs keep their cut-out, which matters for logos.

  2. 02

    Pick a mode and size

    Lithophane for photos, plaque for logos, relief for grayscale height maps. Set the printed width in millimetres.

  3. 03

    Download and slice

    Get a watertight binary STL or an OBJ, drop it into your slicer, print. Nothing to sign up for.

Why it runs in the browser

Most converters ask you to upload a photo, wait in a queue, then hand back a file you cannot inspect. Here the picture is decoded by the canvas API, turned into a height grid, and triangulated into a watertight solid on your own machine — which is also why it is instant.

What the mesh builder does
Width20 – 200 mm, set by you
Thickness0.6 – 4 mm range
Resolution60 – 300 points across
Base0.4 mm flat floor, watertight
ExportBinary STL, ASCII OBJ

What an image to STL converter actually does

An STL file describes a surface with triangles. A photograph describes colour on a flat grid. Converting one to the other means deciding, for every point of the picture, how thick or how tall the printed part should be at that point. That is the whole trick, and it is why the result looks like a relief rather than a completely new object.

This converter makes that decision in three different ways, and the mode you pick matters far more than any other setting on the page.

The three modes

Lithophane is the classic. Darkness becomes thickness, so the picture is hidden in white plastic until you hold it against a lamp. It is the mode people actually want when they search for image to STL, and it prints best standing upright at 100% infill.

Relief treats the image as a height map where white is tall. Use it for grayscale depth maps, terrain exports, embossed text or anything you already rendered as a grey image. It prints flat on the bed with no supports.

Plaque looks at transparency and brightness: dark, opaque pixels become a raised shape on a 0.4 mm base slab, while transparent, white and pale areas stay flat. This is the mode for logos, line art, silhouettes and simple badges. A transparent PNG gives the cleanest outline, and a dark logo on a white JPG works too, because the white stays as the base.

Settings that change the print

Width is the real printed width in millimetres. Everything is exported at that scale, so a 100 mm setting arrives as a 100 mm part in Cura or PrusaSlicer with no resizing.

Depth is the thickness range. Below 2 mm a lithophane turns into a grey blur when lit; above 4 mm it gets heavy and the brightest areas start to block light.

Detail is the sampling grid. Every step up roughly squares the triangle count, so 140 px is a good default. The converter stops at 120,000 triangles to keep the tab responsive, which is about 240 px for a square image; wide or tall images can go higher.

Print settings that work

Print lithophanes upright, 100% infill, 0.12 mm layers, 3 perimeters, white or natural filament. Print plaques and reliefs flat on the bed at 0.16–0.2 mm with a brim if the base is thin. Anything thinner than 0.8 mm in the mesh is below two nozzle widths and will not survive the first layer.

What this tool will not do

It will not guess the back of a face, rebuild a room from one angle, or invent geometry the picture does not contain. Those are reconstruction jobs and they need a model trained for it. Keeping the promise small is why the output is predictable: you always get a watertight solid you can slice immediately, at the exact size you asked for.

Where to go next

Start with photo to STL if you have a photo, PNG to STL if you have a logo, and image to OBJ if your software wants OBJ. The 2D to 3D guide explains how reliefs differ from reconstructions in more depth.

Image to STL questions

Is the image uploaded anywhere?

Not in the browser converter. Your file is read with the canvas API and the mesh is built in the same tab, so the picture never leaves your computer. The separate AI mode at /ai-image-to-3d does send the photo to a server — that page says so before you upload.

What is the difference between this and an AI 3D generator?

AI generators try to invent a 3D shape from a photo and guess the parts you cannot see. This tool does something narrower and more predictable: it reads brightness or transparency and builds a relief solid — a lithophane, a height map or a raised plaque. If you need a printable object that matches the picture exactly, a relief is the honest answer; if you need an invented 3D object, a reconstruction model is the right tool and this page says so plainly.

Which file format should I choose?

Binary STL for any slicer — Cura, PrusaSlicer, Bambu Studio, Orca. Choose OBJ if you are opening the mesh in Blender, Fusion, ZBrush or a laser/CNC toolpath tool.

What size should I print?

A lithophane reads best at 80–120 mm wide with 2.5–3.5 mm of thickness range. Plaques and keychains are usually 40–80 mm. The width slider is the real printed width in millimetres, so the mesh arrives at the right scale in your slicer.

Does it work on a phone?

Yes, but a phone is slow at high detail. Keep the detail slider around 100–140 px on a phone and build again on a desktop if you want a denser mesh.

Why does my print look blocky?

Detail is sampled on a grid, so thin lines and small text need a higher detail setting. Raise detail toward 200–240 px for line art; the converter stops at 120,000 triangles, which is about 240 px for a square image (wide or tall images can go higher). Avoid images smaller than the grid you ask for.

Is it really free?

Yes, and there is nothing to sign up for. The only cost is your own electricity and the filament.